NDT Service & Inspection Companies in Bangladesh

ABOUT NDT (NON-DESTRUCTIVE TESTING):

At Frist Assalamu Alaykum to all. We Know NDT Means Non-Destructive Testing. Non-destructive testing (NDT) is a testing and analysis technique used by industry to evaluate the properties of a material, component, structure or system for characteristic differences or welding defects and discontinuities without causing damage to the original part. It refers to an array of inspection methods that allow inspectors to evaluate and collect data about a material, system, or component without permanently altering it.Also it efers to an array of inspection techniques that allow inspectors to collect data about a material without damaging it.

NDT also known as:

NDE (non-destructive examination)
NDI (non-destructive inspection)
NDE (non-destructive evaluation)

In the field, NDT is often used as an umbrella term to refer to non-destructive inspection methods, inspection tools, or even the entire field of non-destructive inspections.

There are many NDT Service & Inspection Provide Companies in Bangladesh Right Now. We can try to give some top NDT Service & Inspection Provide Companies in Bangladesh.

01. BDNDT.COM – Complete NDT Solution

OUR SERVICE

==> VISUAL TESTING (VT) INSPECTION SERVICE

==> RADIOGRAPHIC (RT) INSPECTION SERVICE

==> ULTRASONIC (UT) INSPECTION SERVICE

==> MAGNETIC PARTICAL (MT) INSPECTION SERVICE

==> ACOUSTIC EMISSION (AE) INSPECTION SERVICE

==> DYE PENETRANT (PT) INSPECTION SERVICE

==> LEAK TESTING (LT) INSPECTION SERVICE

==> EDDY CURRENT (ET) INSPECTION SERVICE

==> HARDNESS INSPECTION SERVICE

==> SURFACE ROUGHNESS INSPECTION SERVICE

==> DFT / PAINT COATING THICKNESS INSPECTION SERVICE

==> POSITIVE MATERIAL INDENTIFIRE (PMI) INSPECTION SERVICE

==> HOLIDAY TEST SERVICE ==> PULL OFF TEST / ADISIF TEST SERVICE

==> EXOTHERMIC WELDING SERVICES

==> CATHODIC PROTECTION SERVICE

==> CIVIL NDT INSPECTION SERVICE

==> SOIL NDT INSPECTION SERVICE

==> TANK CALEBRATION SERVICE

==> PRESSER VASSEL, LIFTING & BOILER INSPECTION SERVICE

==> TOFD INSPECTION SERVICE

==> DESTRACTIVE TESTING (ROOT BEND, FACE BEND, TENSILE TEST, MACROGRAPHY, IMPACT TEST SERVICE

==> SAFETY INSTRUMENT REPAIR

Address Details:

House-64, Road-6, Block-A, Pollabi Mirpur, Dhaka-1216
Phone : +88 01728780635
E-mail : masum.sub@gmail.com,info@bdndt.com
Website: bdndt.com

02. IES-Industrial Engineering Services

Their NDT service:
=> Visual Testing (VT),
=> Radiography Testing/X-ray
=> Remote Visual Inspection (RVI),
=> Dye Penetrant Testing (DPT) ,
=> Magnetic Particle Testing (MPT),
=> Ultrasonic Thickness Gauging,
=> Conventional Ultrasonic Testing (UT),
=> Phased Array Ultrasonic Testing (PAUT),
=> Ultrasonic Time of Flight Diffraction (TOFD) inspections
=> Pressure Vessel & Lifting Inspection
=> Ultrasonic Corrosion Mapping

Address Details:

House-64 (Ground Floor), Road-6, Block-A Mirpur, Section-12, Dhaka-1216
Phone : +88 01710134359, +8801778860573
E-mail : amit@iestechbd.com,
Website: www.iestechbd.com

03. Bureau Veritas (Bangladesh) Private Limited

Bureau Veritas Bangladesh is providing wide range of Testing, Inspection & Certification (TIC) services Bangladesh.

Address Details:
Bureau Veritas BD Pvt. Ltd. Symphony Level-5, Plot-SE(F)9,
Road-142 South Avenue, Dhaka 1212
Email: bv.dhaka@in.bureauveritas.com
Call us on +88 02 8836459/8836765
call us on +88 0 1714069177

04. SAJ ENGINEERING AND TRADING COMPANY

Their NDT service:
=> NON-DESTRUCTIVE TESTING
=> MAGNETIC PARTICLE TESTING PRODUCTS
=> REMOTE VISUAL INSPECTION PRODUCTS
=> EDDY CURRENT TESTING PRODUCTS
=> ULTRASONIC PRODUCTS
=> RADIOGRAPHY TESTING PRODUCTS
=> HARDNESS TESTING
=> MATERIAL COMPOSITION IDENTIFICATION

Address Details:
+88-02-51040355, 51040332
info@sajetc.com
House # 351 (5th floor), Road # 05, DOHS, Mirpur, Dhaka-1216, Bangladesh.
(Reg. address: 205/2 Elephant Road, Dhaka-1205)

05. TÜV SÜD Bangladesh

Their NDT service:
=>visual testing (including borescope and industrial endoscope)
=>magnetic particle testing
=>penetrant testing
=>eddy current testing
=>hardness testing
=>radiographic testing (X-rays and Gamma rays)
=>ultrasonic testing
=>guided waves
=>phased array
=>time of flight diffraction (ToFD)
=>acoustic emission testing
=>leak rate testing
=>long range UT
=>magnetic flux leakage tank floor scanning
=>positive material identification (PMI)
=>immersion UT
=>computed tomography
=>digital projection radiography
=>on field metallography by replicas (lifetime assessment)
=>thermal and infrared

Address Details:
T +88-02-58954120 / +88-02-58954115
info@tuv-sud.com.bd
www.tuv-sud.com.bd

06. TÜV Rheinland

Their NDT service:
=>Radiographic testing
=>Magnetic particle inspection (MPI)
=>Liquid penetrant testing (PT)
=>Ultrasonic testing (UT)
=>Eddy-current testing (ET)
=>Positive material identification (PMI)

Address Details:
www.tuv.com

07. Bangladesh Industrial X-Ray

Their NDT service:
=> Radiography Testing/X-ray
=> Remote Visual Inspection (RVI),
=> Dye Penetrant Testing (DPT) ,
=> Magnetic Particle Testing (MPT),
=> Ultrasonic Thickness Gauging,

Address Details:
House#10, Road#02, Block-A,
Section#11, Mirpur, Dhaka-1216
Mobile # +880 1963 622 600 (Official)
E-mail: info@bixndt.com (Official)
www.bixndt.com

08. NDTS Bangladesh

Their NDT service:
=>Remote Visual Inspection
=>Dye Penetrants Inspection
=>Magnetic Particle Testing
=>Ultrasonic Thickness Gagging
=>Ultrasonic Flaw Detection
=>Phased Array Ultrasonic Testing
=>Time of Flight Diffraction (TOFD)
=>Radiography Testing
=>Eddy Current Service
=>Hardness Testing
=>Infrared Thermography
=>Vibration Analysis and Dynamic Balancing
=>Vibration Measuring and Bearing Checking
=>Lube Oil Testing

Address Details:
House#351, Road#07, DOHS-Mirpur
Dhaka-1216, Bangladesh.
E-mail: info@ndtsbd.com
E-mail: ndtsbd@gmail.com
Voice: +88 01782777700

09. Radiant Engineering Training Services & Inspection Ltd (RETSIL)

Their NDT service:
=>Radiographic Test (X-Ray & Gamma Ray)
=>Ultrasonic Thickness Gauging (UTG)
=>Ultrasonic Test (UT)
=>Phased Array Ultrasonic Testing (PAUT)
=>Dye Penetrant Test (DPT)
=>Magnetic Particle Inspection (MPI)
=>Visual Testing
=>Leakage Testing
=>Vacuum Testing
=>Leakage Testing
=>Post Weld Heat Treatment (PWHT)
=>Paint Coating Thickness Measurement
=>Positive Material Identification (PMI)
=>Load Test of Lifting Equipment
=>Equipment Inspection
=>Wire Rope Inspection
=>Noise Level Test
=>Vibration Test
=>Hardness Test
=>Hydrostatic Test

Address Details:
Head Office Address: 36/7 Johurri Mohallah, Mohammedpur, Block-F, Dhaka-1207;
Website: www.retsil-ndt.com; email adress: retsil-ndt@outlook.com;
Cell phone:+8801847041869

Are you add your company in here? please contract with us.

Modsonic Edison-1 – Ultrasonic Thickness Gauges in BD

EDISON – 1 : Salient Features (Doc.Copy from Modsonic website)
  • Basic model in EDISON Series
  • Simple in operation
  • Large 4 digit LCD Display
  • Operates on two AA size batteries
  • One step calibration
  • Accurate, Reliable and Robust
  • Accuracy of ±1 mm
  • Full range of probes for all applications
  • Detachable Probe Cable
  • Option of EL back light for indoor / dark areas
  • Sealed touch keypad
Technical Specifications
Applicable MaterialsAll homogeneous materials which allow transmission of Ultrasonic energy through it like most of metals, hard plastics, glass, ceramics etc.
Measuring Range1mm to 300mm (Specified range depends on test material, transducer, surface and temperature.)
ProbeDual crystal (Transmitter Receiver) type.
Key PadSealed tactile type
Velocity1000 m/s to 9999 m/s.
DisplayLCD type. It displays Thickness, Velocity, Battery check, Coupling check, and stored readings with IDs.
Resolution0.1 mm(0.01mm in EDISON-1P)
Accuracy0.1mm (up to 60mm) {with standard 0.5% (above 60 mm) probe DT 201}
V- path CorrectionBuilt-in for better accuracy.
CalibrationOne step calibration.(for steel).
Battery2 Penlite Dry Cells (AA) or NiCd.
Operating time18 to 20 hours.(with alkaline batteries).
Low BatteryIndication by Blinking of LCD.
Auto Power off3 minutes after switching on/ last reading
Size mm125(H) x 65(W) x 30(D).
Weight225 Grams (With batteries).

Magnaflux ST700 Stationary Inspection LED UV Lamp for Fluorescent NDT

The ST700 is an inspection-grade overhead LED UV flood lamp with high-intensity UV-A illumination for non-destructive testing examinations such as fluorescent penetrant and magnetic particle testing.

The ST700 projects an ultra-wide, even beam of UV-A light straight onto the inspection area, allowing for quick examination of parts with minimal part handling. The high intensity beam makes indications stand out bright and clear, speeding up the inspection process. The ST700 is certified to NDT standards for LED UV lamps and certified for Aerospace Prime and OEM specifications for emission spectrum and beam profile.

The IP65 aluminum case stands up to harsh environments and a range of mounting and angling options allow it to be set up anywhere in the inspection process; from mag benches to wash stations.

Benefits

Speed up the inspection process

  • Inspect more of the part at once thanks to the ultra-wide beam
  • Eliminate additional steps and equipment involved with using a secondary hand-held inspection lamp

Minimize risk of missing indications

  • Indications stand out bright and clear due to high intensity LED technology
  • Mount the light out of the way, up to 46 in / 117 cm above the inspection surface while still maintaining inspection level intensity

Real-world reliability

  • Fully sealed construction prevents dust and water damage
  • Maintain UV intensity and coverage over time with non-clouding, proprietary lenses
  • Rugged, impact resistant metal construction designed for NDT environments

Work in comfort

  • Easily maintain and changeover equipment with built-in white light

  Features

High intensity compliant UV-A illumination20 x 26 in (50 x 66 cm) wide, uniform beam on standard model at 36 in (90cm)IP65 sealed construction prevents damage from water, vapor or dustAngled mounting bracketsNo hot-spots in the beam profileAluminum body in a rugged, durable designNo internal fan necessaryAerospace prime and OEM certifiedCertified to ASTM, AITM, RRES and Nadcap