Hakko FX888D-23BY Soldering Station with Five Extra Tips Price in BD

Original price was: ৳ 32,000.00.Current price is: ৳ 30,000.00.

Digital Soldering Station ESD Safe version with 5 extra tips -T18-D08/D12/D24/D32/S3 tips

FX-888D KIT version with 5 extra tips -T18-D08/D12/D24/D32/S3 tips (6 total with the iron)
Compatible with T18 series tips
Compatible with the FX8804-CK hot tweezer
Adjustable temperature control
Temperature range 120° – 899°F (50° – 480°C)
Digital display shows °F or °C
Maintains idle temperature within 1.8°F (1°C) when set to 400 – 899°F (200 – 480°C)
Ceramic heating element and sensor ensures rapid heat-up temperature and fast thermal recovery
Password protected temperature setting functionality
Preset mode allows you to store up to five (5) preset temperatures
Slender, lightweight ergonomic iron handles


Hakko FX888D-23BY – Soldering Station with Five Extra Tips (T18-D08/D12/D24/D32/S3)

Soldering Station with Five Extra Tips
Adjustable temperature control
Temperature range 120° – 899°F (50° – 480°C)
Digital display shows °F or °C
Excellent thermal recovery
Heater output has been increased by 30% compared to that of the conventional models HAKKO 936·937. Also FX-888D delivers excellent thermal recovery by using T18 series tips for their terrific heat conductivity.

This allows soldering at a lower set temperature and reducing the thermal impact on components as well as tip oxidation that can shorten tip life.

Thermal recovery graph
Rise time to 350°C is 20 seconds faster and tip temperature drop is reduced during continuous work.

HAKKO FX-888D performance comparison graph with conventional stations
Able to shorten the time required for the same work and improve work efficiency significantly.

Designed to be User-Friendly
Small footprint
Compact station body requires a space of only 100 (W) x 120 (D) mm. What’s more, points that come into contact with the floor are positioned as close to the outer edge of the body as possible to improve stability and make the station difficult to fall over.
Simple and easy operation
With only two operation buttons of UP and ENTER in the center, operation is simple and easy. Even if you’re not familiar with operation of machines, you can operate it without difficulty.
Iron holder with full of functions
An iron holder of the same color of a soldering station comes as a set. The highly functional iron holder not only improves ease of use, but also brings a sense of visual consistency to the work environment.
Strict temperature management
Digital display
The FX-888D’s digital display makes it easy to check the set temperature at a glance.
Password function
Settings can be locked using a password to prevent them from being changed unexpectedly. Of course, it is possible to restrict all setting changes or prevent users from switching to particular modes. It allows you to choose a style of usage best suited for your worksite.
Preset mode
This feature is very convenient when you want to change the set temperature to suit a particular workpiece, component, or tip shape. Simply select the desired temperature from a selection of preset temperatures registered in advance. (Up to 5 preset temperatures can be registered.) Preset mode can save your trouble and improve workability.

Adjustment mode
Temperature adjustment* is an essential part of any strict quality control system. With adjustment mode, what used to be a troublesome procedure is now as simple as entering the measured tip temperature to FX-888D.
*Adjust the tip temperature to match the set temperature in case that there is a difference between those temperatures due to tip shape, heater replacement, or other factors.

HAKKO FX-8802 N2 (nitrogen) gas system
Example Configuration (N2 System)

Note: Soldering station, Iron holder, N2 gas generator, and N2 flowmeter must be purchased separately.

HAKKO FX-8803 One-hand, manual-solder-feed iron
Example Configuration (One-hand, Manual-Solder-Feed System)

Note: Soldering station, cap, and Iron holder must be purchased separately.

HAKKO FX-8804 Hot tweezers
Example Configuration (Hot Tweezer System)

Note: Soldering station, cap, and Iron holder must be purchased separately.


How to remove the bottom plate.

1. Press the slide lock button inward.

2. Open the iron holder base while pressing the slide lock.

3. Remove the solder waste in the bottom plate.

In The Box
FX888D Station
FX8801-02 Soldering Iron
T18-D16 Tip included standard plus
5 extra tips -T18-D08/D12/D24/D32/S3 tips
FH800-03BY Iron Holder
A1559 Cleaning Sponge
A1561 Tip Cleaning Wire
Instruction Manual
Product Manual
Spec Sheets
Data Sheet
PACE – Soldering – Side Rail 1 – Q1 22
Manufacturer Specs
Model Name FX-888D
Part Number FX888D-23BY
Power Consumption 70W / 120VAC
Temperature Range 120° – 899°F (50° – 480°C)
Temperature Stability ±1.8°F (1.0°C)
Temperature Control Closed-loop sensor
Dimensions 100(W) x 120(H) x 120(D) mm
3.9(W) x 4.7(H) x 4.7(D) in.
Shipping Dimensions 242(W) x 178(H) x 242(D) mm
9.5(W) x 7.0(H) x 9.5(D) in.
Weight 2.6 lbs (1.2 kg)
Shipping Weight 4.7 lbs (2.13 kg)
ESD Safe Yes
IPC J-STD-001 Meets or Exceeds requirements
Tech Specs
Test Equipment General Attributes
Safety Approval MET
Product Weight 4.7 LBS
Shipping Weight 2.6 LBS
Data Logging No
ECCN Number ear99
Power Supply Voltage 120V 50/60 Hz
Country of Origin Japan


There are no reviews yet.

Be the first to review “Hakko FX888D-23BY Soldering Station with Five Extra Tips Price in BD”

Your email address will not be published. Required fields are marked *