Description
Olympus Epoch 1000i Ultrasonic Flaw Detector
Upgradeable to Phased Array
The EPOCH® 1000, EPOCH 1000iR, and EPOCH 1000i provide advanced conventional ultrasound capabilities for both basic and advanced level users. These portable instruments can also be integrated into small systems for high-speed scanning and single-channel imaging and come standard with a host of high-performance features, including a 6 kHz maximum Pulse Repetition Frequency (PRF) with single-shot measurements for accurate high-speed scanning applications, tunable square wave pulser with PerfectSquare™ technology, and comprehensive digital filter sets for exceptional signal-to-noise clarity.
Features:
Adjustable pulse repetition frequency (PRF): 5 Hz to 6 kHz
Single-shot measurements in all standard modes
Tunable square wave pulser with PerfectSquare™ technology
Programmable analog and alarm outputs
Over 30 digital filter sets
Digital high dynamic range receiver
EPOCH 1000
Advanced UT
The EPOCH® 1000 is an advanced conventional ultrasonic flaw detector that can be upgraded with phased array imaging at an authorized Olympus service center.
EPOCH 1000 iR
Advanced UT + Phased Array Ready
The EPOCH 1000 iR provides the same ultrasonic flaw detection capabilities as the EPOCH 1000 with the benefit of upgrading to phased array with simple field-remote activation.
EPOCH 1000 i
Advanced UT + Phased Array Built-in
The EPOCH 1000 i comes standard with the same advanced ultrasonic flaw detection capabilities as the EPOCH 1000, with the addition of a built-in phased array imaging package.
Full Specifications:
General Specifications
Overall dimensions: (W x H x D) 252 mm × 177 mm × 107 mm (9.92 in. × 6.97 in. × 4.2 in.)
Keypad: English, International, Japanese, Chinese
Languages: English, Spanish, French, German, Japanese, Chinese, Russian, Italian, Polish
Transducer connections BNC or Number 1 LEMO
Data storage :Onboard up to 10,000 IDs with waveform, standard 4 GB compact flash card (removable)
Battery type: Single lithium-ion rechargeable standard
Battery life: 8 hours (conventional UT mode); 7 hours (phased array mode)
Power requirements :AC Mains: 100 VAC to 120 VAC, 200 VAC to 240 VAC, 50 Hz to 60 Hz
Standby mode :Adjustable from 15 minutes to 120 minutes with 50% less battery consumption
Display type: Full VGA (640 × 480 pixels) Transflective Color LCD, 60 Hz update rate
Display dimensions (W x H, Diag.): 132.5 mm × 99.4 mm, 165.1 mm (5.2 in. × 3.9 in., 6.5 in.)
Inputs/Outputs
USB ports: 1 USB Client, 3 USB Host ports
RS-232: Yes
Video output: VGA output standard
Analog output: 4 analog outputs, Selectable 1V/10V Full Scale, 4 mA max
Alarm output: 6 alarm outputs, 5V TTL, 10 mA
Trigger I/O: Trigger input 5V TTL; trigger output, 5 V TTL, 10 mA
Encoder inputs 2-axis encoder line (quadrature)
Environmental Ratings
IP rating: Designed to meet requirements of IP66
Explosive atmosphere: Tested to MIL-STD-810F, Method 511.4, Procedure 1. Atmosphere defined per NFPA 70, Article 500 as Class I, Division 2, Group D.
Shock tested: IEC 600689-2-27, 60 g’s, 6 µsec Half-Sine, 18 Axes total
Vibration tested: Sine vibration, IEC 60068-2-6, 5 Hz to 150 Hz @ 0.03 in. or 2 g’s Displacement Amplitude, 20 sweep cycles
Operating temperature: –10 °C to 50 °C (14 °F to 122 °F)
Battery Storage temperature: –20 °C to 60 °C (–4 °F to 140 °F)
Battery Recharge temperature: 0 °C to 40 °C (32 °F to 104 °F)
Pulser
Pulser type: Tunable Square Wave
PRF: 5 Hz to 6,000 Hz in 5 Hz increments
Energy settings 50 V to 475 V in 25 V increments
Pulse width: Adjustable from 45 ns to 5,000 ns (0.1 MHz) with PerfectSquare Technology
Damping 50 Ω, 100 Ω, 200 Ω, 400 Ω
Pulser delay: Not applicable
Receiver
Gain: 0 to 110 dB
Maximum input signal: 20 Vp-p
Receiver input impedance: 400 Ω ± 5%
Receiver bandwidth: 0.2 MHz to 26.5 MHz @ –3 dB
Receiver delay NA
Digital filter settings Standard filter set (EN12668-1 Test & Compliant): 7 filters
Advanced filter set (not tested to EN12668-1): 30 filters
Rectification: Full wave, positive half wave, negative half wave, RF
Reject: 0 to 80% FSH with visual warning
Amplitude measurement: 0% to 110% full-screen height with 0.25% resolution
Measurement rate: Equivalent to PRF in all modes
Calibration
Automated calibration
• Velocity, Zero Offset
• Straight Beam (first back wall or echo-to-echo)
• Angle Beam (Soundpath or Depth)
Test modes: Pulse Echo, Dual, or Through Transmission
Units: Millimeters, inches, or microseconds
Range: 3.33 mm to 26,808 mm (0.131 in. to 1054.1 in.) at 5900 m/s (0.2320 in./µs)
Velocity: 635 to 15, 240 m/s (0.0250 to 0.6000 in./µs)
Zero offset: 0 µs to 750 µs
Display delay: –59 mm to 25,400 mm (–2.323 in. to 1000 in.)
Refracted angle 0° to 85° in 0.1° increments
Gates
Measurement gates: Two fully independent gates for amplitude and time-of-flight measurements
Measurement mode: Soundpath
Interface gate: Optional, with Gate 1 and Gate 2 tracking
Gate start: Variable over entire displayed range
Gate width: Variable from gate start to end of displayed range
Gate height: Variable from 2% to 95% full-screen height
Alarms
• Positive and negative threshold
• Minimum depth
Reference cursors: Two reference cursors for A-scans
Measurements
Displayed measurement: Six locations available (manual or auto selection)
Gate 1: Thickness, soundpath, projection, depth, amplitude, time-of-flight, min./max. depth, min./max. amplitude
Gate 2: Same as Gate 1
IF gate (Optional): Thickness
Echo-to-Echo: Standard. Choose between Gate2-1, Gate2-IF, and Gate1-IF
Other measurements: Overshoot (dB) value for DGS/AVG, ERS (equivalent reflector size) for DGS/AVG, AWS D1.1/D1.5 rating (D), reject value
DAC/TVG: Standard
DAC points: Up to 50 points, 110 dB dynamic range
Special DAC modes: 20% to 80% DAC, Custom DAC (up to 6 curves)
TVG table: Up to 50 points, 110 dB dynamic range, compatible with IF Gate at all PRF settings
Curved surface correction: Standard. Tube or bar OD correction for angle beam measurements
Weight: 3.67 kg (8.1 lb), including lithium-ion battery
Download Product Datasheet
Hasan mahabub –
Thanks for provide original product