TQC Sheen Bresle KIT Sodium Chloride Test

The Bresle Kit – Sodium Chloride Test Kit complies with the ISO 8502-6 and ISO 8502-9 standards that describe the Bresle Method to assess the level of soluble salts using a Bresle patch or Bresle sampler, distilled water, and a conductivity gauge. The conductivity is directly proportional to the concentration of dissolved chloride ions in the solution. The kit includes all the necessary equipment to execute a bresle test that will indicate the contamination of soluble salts on blast-cleaned surfaces prior to coating. Inside the Bresle Kit – Sodium Chloride Test Kit is a conductivity gauge used for the assessment of soluble salt ions as chlorides, sulfates, and nitrates.

Specifications:

Range: 0,1 – 20.000 mg/m2 (with DSP method)
Resolution: 0,1 mg/m2 (with DSP method)
Accuracy: 1% accuracy of gauge
Temp. range: 0 – 50 ˚C
ATC: 0 – 50 ˚C
Normalization temp.: 25 ˚C
Auto-off: 8.5 minutes after last key pressed
IP class: IP67
Auto calibration at: 84 μS/cm
Patch area: 12,50 cm2
Patch type: Latex membrane

TQC Bresle KIT- Chloride Test KIT

• digital conductivity meter,
• 25x bresle patch,
• 6x 25ml beaker,
• 200ml distilled water,
• 20ml syringe with needle,
• calibration, and rinse solution,
• magnetic bresle test spot marker.