BDNDT Provide Ultrasonic Thickness Gauging Service in Bangladesh. Experts in Pipeline, Chimney & Boiler tube Testing. ultrasonic thickness measurement (UTM) is a method of performing non-destructive measurement (gauging) of the local thickness of a solid element (typically made of metal, if using ultrasound testing for industrial purposes) basing on the time taken by the ultrasound wave to return to the surface. This type of measurement is typically performed with an ultrasonic thickness gauge.
Digital Ultrasonic Thickness Gauging (UTG)
Inspector Performing Ultrasonic Thickness Gauging Service Onsite
Inspector Performing Ultrasonic Thickness Gauging Service Onsite
Measuring existing thickness through the cross section is used to determine loss of wall attributed to corrosion. This gives an indication of degradation level. Our Ultrasonic thickness gauging service helps in condition monitoring of Chimneys, Boiler pipes and tubes. Inspection for corrosion can range from simple measurement to detailed corrosion mapping using C-scan images. It is important to monitor the structures and processing plants to maintain safety and reliability.
Metals especially steels are subjected to corrosion during usage of parts. Corrosion is phenomenal if the environment is conducive for it. Chemical, acidic surrounding accelerated the rate of wall thickness loss. Even some times the losses are exponential, the pipes and tubes may leak and structures may fail to bear the load.
Ultrasonic thickness tests are used extensively on basic shapes and products of many materials, on precision machined parts, and to determine wall thinning in process equipment caused by corrosion and erosion.
Using Meter Details:
Modsonic Make Edition-1 UTG
| Brand | Modsonic |
| Display | LCD |
| Size | 125(H) x 65(W) x 30(D) mm |
| Measuring Range | 1 to 300 mm |
| Battery Life | 18 to 20 hours (with alkaline batteries) |
| Model Name / Number | EDISON-1 |
| Dimension | 125X65X30 |
| Resolution | 0.1 mm |
| Accuracy | 0.1mm (up to 60mm) {with standard 0.5% (above 60 mm) probe DT 201 |
| Battery Type | 2 Penlite Dry Cells (AA) or NiCd. |
| Display Type | LCD type |
| Material | All homogeneous materials which allow transmission of Ultrasonic energy |
| Weight | 225 Grams (With batteries) |
| Calibration | One step calibration.(for steel) |
| Low Battery | Indication by Blinking of LCD |
| V Path Correction | Built-in for better accuracy |
| Velocity | 1000 m/s to 9999 m/s |
| Auto Power off | 3 minutes after switching on/ last reading |
| Operating time | 18 to 20 hours.(with alkaline batteries) |
| Key Pad | Sealed tactile type |
| Probe | Dual crystal (Transmitter Receiver) type. |
Check Our Other NDT Services
- NDT testing service
- Radiography x-ray testing
- Eddy Current testing
- Ultrasonic Testing UT Service
- Magnetic particle inspection
- Demagnetization service
- Dye penetrant Testing
- Visual Welding Inspection
- Certification courses on NDT
- Aerospace NDT Services
- Coating Inspection
- Borescope Camera Service
- Hardness Test
- Civil NDT Test
- Tank Calebration
- Boiler Inspection
- Tank Rust Clening Service
