- “Yushi UM-5D Thru-Coating Ultrasonic Thickness Gauge” already exists in your wishlist
-
Amprobe ULD-405 Ultrasonic Leak Detector
The ULD-405 is ideal for inspecting:
- Compressed air or other gases*
- Plumbing
- Electrical and mechanical systems
- Valves, tanks and pipes
- Heat exchangers, boilers and condensers
- Air conditioning and refrigeration systems
- Motors and machinery
- Automotive repair
-
Marktec Super Light D-10L UV LED Black Light For NDT
Marktec Super Light D-10L UV LED Black Light For NDT
Standard: JIS Z 2323
UV characteristics: Central UV intensity : Over 4,050μW/cm21 Main wavelength : 365nm ±5nm2
Lamp body: ϕ110×135Lmm Approx.0.5kg
Power source box: 266W×166D× 220H mm Approx.2.0kg -
৳ 390,000.00
৳ 410,000.00MarSurf PS10 Portable Surface Roughness Tester
Features
Compact roughness measuring instrument for mobile use
Simple and intuitive to use: As easy to use as a smart phone
Large, illuminated 4.3″ TFT touch display
Adjustable display
Start button also serves as the Home button for direct access to the start screen
Data backup as TXT, X3P or PDF file
Creation of completed PDF measuring records in the measuring device
Customer-specific comments for the PDF measuring record are entered directly into the MarSurf PS 10
Power supply independent operation: Over 1200 measurements without having to recharge the instrument
An all in one solution. Small and lightweight (approx. 500 g)
Instrument flexibility: Removable drive unit
All the measuring positions you need: horizontal, vertical, upside down
31 surface parameters offer the same range of functions as a laboratory instrument.
Error free operation thanks to an integrated, removable roughness standard
Quick access to your frequently used functions via the Favorites list in the display
Very short activation time: results available within seconds
Automatic cutoff selection, so even non-specialists can be sure of getting the correct measuring results -
৳ 25,000.00
৳ 27,000.00Milwaukee MW10 Digital Free Chlorine Tester in BD
Design features
- Fast, easy-to-read results with large digital LCD readout.
- Range from 0.00 to 2.50 ppm.
- Accurate to ±0.03 ppm or ±3% of reading @ 25 °C.
- Small and ergonomic design.
- No calibration needed.
- Reliable and repeatable measurements with no visual assessment.
- Runs on 1 x AAA battery with auto shut off to extend battery life.
- Adaptation of the USEPA Method 330.5. The reaction between Free Clorine and DPD causes a slight pink tint in the sample.
- Replacement Reagents: Mi526-25
- Replacement cuvettes 2 each: MI0011
-
৳ 82,000.00
৳ 85,000.00Milwaukee MW805 MAX 4-in-1 Combo Meter with ATC Price
The Milwaukee Combo meter offers:
- pH, conductivity / nutrient EC, TDS (ppt) with automatic temperature compensation.
- Selectable TDS factors from .40 to 0.8; defaulet value 0.50.
- Stability indicator prompting the user when the readings stabilize.
- Dedicated GLP key to store and recall data on system status.
- A replaceable, Amplified Combination pH/EC/TDS/Temp probe with a single 3 foot cable (1 meter) for easy use (MA852D/1 probe included)
- A cloth junction on the pH sensor to reduce contamination when measuring fertilizer solutions. Gel filled for long lasting measurments.
- A light weight and portable form factor at just 9.2 ounces (260 g) with battery and just over 3 inches wide.
- A large easy to read display.
- Factory calibration for Temperature and simple, highly accurate, single cell automatic, one point calibration for EC and an automatic up to 5 point calibration for pH.
- IP 67 rated rugged case built for field or lab applications.
- Specialized design for hydroponic, aquaponic, and greenhouse growers.
-
৳ 35,000.00
৳ 38,000.00Milwaukee MA871 Digital Brix Refractometer Price
Design features
- Fast, accurate results with digital dual level LCD readout
- Easy measurement with just 2-3 drops of sample needed
- Results in less than 2 seconds
- Simple one-point calibration using distilled or deionized water
- Easy-to-clean stainless steel sample well
- Meter rated to IP65 as “dust tight” and protected against water jets
- Battery percent level indicator with automatic shut-off (batteries included)
- Automatic Temp. Compensation (ATC)
-
Fluke PVA-1500T2 Solmetric PV Analyzer I-V Curve Tracer Kit in Bangladesh
Features
- Built-in PV performance modeling and advanced wireless irradiance, temperature and tilt sensing
- Unprecedented measurement throughput with sweep-to-sweep delays as low as nine seconds
- Saves time through automated data analysis and reporting, streamlining the process of obtaining and interpreting measurement results
- Uninterrupted measurements even in hot environments
- Measures and displays I-V curves up to 1500 V and 10 A
- Advanced built-in PV model provides immediate PV performance checking
- Sweep-to-sweep delay of nine seconds to measure 3.5 MW in under an hour
- Database of more than 70,000 modules with automatic updates
- Wireless interfaces for faster setup, safer work environment, and freedom of movement during PV troubleshooting
- In-the-field firmware update ready
- PC connection during testing allows you to analyze and manage data in the field
- Solmectric PV Analyzer Software and Data Analysis Tool (DAT) insights, visualizations, and customizable reports
-
Fluke 62 MAX Plus Infrared (IR) Thermometer in Bangladesh
Features
- Provides a 12:1 Distance to spot ratio
- Offers single laser targeting for accurate and repeatable measurements
- IP54 rating against dust and moisture
- High and low alarms for rapid detection of temperatures outside the limits
- Powered by a single, standard AA battery
- Withstands a 9.8′ (3 m) drop
- Small, lightweight form factor to clip comfortably to your tool belt or belt loop, or easily fit in your tool box
- A large, backlit display to make data easier to read, even in dark areas
- Displays Min/Max/Avg/Dif: the minimum, maximum or average temperature, or the difference between two measurements
-
Fluke TiS75+ Thermal Camera Price in Bangladesh
Key Features
384 x 288 infrared resolution
Asset Tagging
Touchscreen IR Fusion™
IS3 and AVI video recording
Measure up to 550 °C
Dew-point calculation











