-
৳ 1,150,000.00
৳ 1,160,000.00Fluke 754 Documenting Process Calibrator Price in BD
- Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
- Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
- Power transmitters during test using loop supply with simultaneous mA measurement
- Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
- Create and run automated as-found/as-left procedures to satisfy quality programs or regulations.
- Record and document results
- Holds up to a full week of downloaded procedures and calibration results.
- Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
- Easy to use
- Three year warranty
- Bright white dual display. Read both sourced and measured parameters simultaneously.
- Multi lingual interface
- Rechargeable Li-Ion battery for 10 hour uninterrupted use. Includes gas gauge.
- Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms.
- Delivered with DPC/Track Sample software.
- Compatible with many Asset Management software packages.
-
৳ 1,180,000.00
৳ 1,190,000.00Fluke 1775 – Three Phase Power Quality Analyzer Price in BD
Three-Phase Power Quality Analyzer
Applications: Energy surveys and load testing, Harmonic surveys, Nuisance circuit breaker tripping, Power utility power quality surveys, Discovery of equipment failures caused by transients
Automatically measure power and power quality parameters
At-a-glance power quality health for faster troubleshooting
Easily view V/A/Hz, power, dips, swells, and harmonics data
Capture high-speed transients up to 8 kV
Power directly from measurement circuit without a line cord
Simple data downloads using USB memory stick, WiFi, LTE, wired Ethernet, or USB cable
2 auxiliary measurement inputs for measurements of non-electrical units: temperature, humidity, light intensity -
৳ 1,200,000.00
৳ 1,250,000.00Fluke 754 Documenting Process Calibrator HART Price in BD
The 753 and 754 Documenting Process Calibrators are battery-powered, hand-held instruments that measure and source electrical and physical parameters. In addition, the 754 supplies basic HART? communicator functions when used with HART-capable transmitters.
The 754 is everything you needed and wished for in the 744 and more! HART communication capability is combined to deliver an integrated communicating calibrator. This rugged, reliable tool is ideal for calibrating, maintaining, and troubleshooting HART and other instrumentation. The 754 does the work of several tools – sourcing, simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device. Youﾒll fall in love with the new improved graphical screen, Li-on battery for longer life, USB port and new accessories to complete the package. -
৳ 1,500,000.00
৳ 1,550,000.00INNO View 12R SM MM Fiber Ribbon Fusion Splicer Price in BD
The Inno View 12R, a ribbon splicer with the fully motorized clamp alignment system, is the most powerful and state-of-the-art ribbon splicer in the market. Its advanced automatic clamp alignment system offers an accurate and dependable ribbon fiber splicing up to 12 fibers with double – tapping (Zoom in & out) to the worldâ??s highest magnifi cation of 250x for ribbon splicer. The View 12R provides maximum work efficiency through the fast splicing & heating time, ultra-high battery capacity of 220 splice / heat cycles, and universal holder both for 250?m & 900?m single fiber.
-
৳ 3,000,000.00
৳ 3,100,000.00Fluke 1760 Basic Three Phase Power Quality Recorder Topas Price in BD
POWER QUALITY RECORDER-TOPAS, W/O V OR I PROBES, NO TRANS
- GPS time synchronization: Correlate data with events or datasets from other instruments with precision
- 10 MHz, 6000 Vpk waveform capture: Get a detailed picture of even the shortest event
- Flexible and fully configurable thresholds and scale factors: Allows user to pinpoint specific issues by defining the detailed criteria for detection and recording of disturbances.
- Uninterrupted power supply (40 minutes): Never miss important events – even record the beginning and end of interruptions and outages to help determine the cause
- Fully Class-A compliant: Conduct tests according to the stringent international IEC 61000-4-30 Class-A standard
- Rugged field design: Insulated housing and a solid state design with no rotating components enable reliable testing
- Services
- Phased Array Ultrasonic Testing
- Ultrasonic Testing
- X-ray Radiography RT Testing
- Liquid Penetrant Testing
- Magnetic Particle Testing
- Borescope Inspection Services
- Cathodic Protection Services
- Positive Material Identification PMI Testing
- Tank Calibration Service
- Laser Cleaning Service
- Asset Integrity Service
- Civil NDT Service facilities
- Electrical Inspection
- Inspection & Testing
- Lifting & Heavy Equipment Inspection
- Boiler Inspection
- Pressure Vessel Inspection
- Mechanical Service
- Paint Coating Inspection
- Risk Based Inspections
- Calibration
- NDT Equipment
- Ultrasonic Flaw Detection (UT)
- Ultrasonic Thickness Gauges (UTG)
- Coating Thickness Gauges
- Magnetic Particle Equipment
- Radiography & X-ray
- Holiday Detectors
- Hardness Tester
- Liquid Penetrant
- Black Light
- Salt Contamination Meter
- Eddy Current
- Moisture Meter
- Barkhausen Noise Analyzer
- Salt Contamination Meter
- Civil NDT Equipment
- Laser Machine
- Industrial Machinery
- Security & Safety
- C&T
- Blogs
