Modsonic EDISON – 1M Ultrasonic Thickness Gauge Price in BD

Description

ULTRASONIC THICKNESS GAUGES

EDISON-SERIES

G 0.01 mm (10 microns) Resolution **    G Built-in Calibration Block G One Step Calibration e  EL back-light for

indoor/ dark areas(optional)

XAvailable in EDISON-1M X X Available in EDISON-1P

G BEST VALUE FOR M0flEY.

Technical   Specification

EDISON-1 AND EDISON-1M

Applicable Materials        :              All homogeneous materials which allow transmission of Ultrasonic energy through

it like most of metals, hard plastics, glass, ceramics etc.

Measuring Range           :              1mm to 300mm (Specified range depends on test material, transducer,

surface and temperature.)

Probe                              :              Dual crystal (Transmitter Receiver) type.

Key Pad                          :              Sealed tactile type.

Velocity                           :              1000 m/s to 9999 m/s.

Display                            :              LCD type. It displays Thickness, Velocity, Battery check, Coupling check, and stored readings with IDs.

Resolution                       :              0.1 mm(0.01mm in EDISON-1P)

 

Accuracy                        :

+ 0.1mm (up  to  60mm)   {with standard

+ 0.5% (above 60 mm)  probe DT 201}

 

V- path Correction          :              Built-in for better accuracy. Calibration      :              One step calibration.(for steel).

Battery                            :              2 Penlite Dry Cells (AA) or NiCd. Operating time                :              18 to 20 hours.(with alkaline batteries). Low Battery    :              Indication by Blinking of LCD.

Auto Power off                :              3 minutes after switching on/ last reading. Size mm           :              125(H) x 65(W) x 30(D).

Weight                             :              225 Grams (With batteries).

EDISON-1M

Memory                          :               2000 readings with 4 digits ID.

RS-232 Port                    :               Available for connectivity to PC / Printer.

Unit                                  :               Imperial (Inches) or Metric (mm) selection available

 

PROBES

PROBES	Frequency (MHz.) & Crystal dia (mm)	TEST RANGE (IN STEEL)		ACCURACY	ALLOWABLE SURFACE TEMPERATURE	TYPICAL APPLICATION
		FLAT SURFACE (mm)	CYLINDRICAL SURFACE (mm)
DT 201	5/10	2 – 200	2-200mm with OD 45mm And more	+_ 0.1 mm upto 60 mm, +_ 0.5% above 60mm	0 to 70 Deg. C	General purpose For Flat surface and Bigger dia.
DT 212	10/5	1 – 25	2-25 mm with OD 25mm and more	+_ 0.1 mm	0 to 70 Deg. C	For lower dia. Tubes and thin objects.
DT 203	2/20	5 – 300	5-300 with OD 100 mm and more	+_ 0.3 mm up to 50 mm, +_ 1% above 50 mm	0 to 70 Deg. C	For castings and Other coarse- grain material.
DT 201 (H)	5/10	4 – 50	5-10 with OD 100 mm And more	+_ 0.1 mm	0 to 150 Deg.C	For elevated surface temperature

(Modifications rights reserved)

 

Download Product Datasheet

EDISON-1M