Modsonic EDISON – 1M Ultrasonic Thickness Gauge Price in BD
৳ 140,000.00৳ 145,000.00 (-3%)
In addition to Edison – 1
| Technical Specifications | |
|---|---|
| Memory | 2000 readings with 4 digits ID. |
| RS-232 Port | Available for connectivity to PC / Printer. |
| Unit | Imperial (Inches) or Metric (mm) selection available |
ULTRASONIC THICKNESS GAUGES
EDISON-SERIES
G 0.01 mm (10 microns) Resolution ** G Built-in Calibration Block G One Step Calibration e EL back-light for
indoor/ dark areas(optional)
XAvailable in EDISON-1M X X Available in EDISON-1P
G BEST VALUE FOR M0flEY.
Technical Specification
EDISON-1 AND EDISON-1M
Applicable Materials : All homogeneous materials which allow transmission of Ultrasonic energy through
it like most of metals, hard plastics, glass, ceramics etc.
Measuring Range : 1mm to 300mm (Specified range depends on test material, transducer,
surface and temperature.)
Probe : Dual crystal (Transmitter Receiver) type.
Key Pad : Sealed tactile type.
Velocity : 1000 m/s to 9999 m/s.
Display : LCD type. It displays Thickness, Velocity, Battery check, Coupling check, and stored readings with IDs.
Resolution : 0.1 mm(0.01mm in EDISON-1P)
Accuracy :
+ 0.1mm (up to 60mm) {with standard
+ 0.5% (above 60 mm) probe DT 201}
V- path Correction : Built-in for better accuracy. Calibration : One step calibration.(for steel).
Battery : 2 Penlite Dry Cells (AA) or NiCd. Operating time : 18 to 20 hours.(with alkaline batteries). Low Battery : Indication by Blinking of LCD.
Auto Power off : 3 minutes after switching on/ last reading. Size mm : 125(H) x 65(W) x 30(D).
Weight : 225 Grams (With batteries).
EDISON-1M
Memory : 2000 readings with 4 digits ID.
RS-232 Port : Available for connectivity to PC / Printer.
Unit : Imperial (Inches) or Metric (mm) selection available
PROBES
|
PROBES |
Frequency (MHz.) &
Crystal dia (mm) |
TEST RANGE (IN STEEL) |
ACCURACY |
ALLOWABLE SURFACE TEMPERATURE |
TYPICAL APPLICATION |
|
| FLAT SURFACE
(mm) |
CYLINDRICAL SURFACE
(mm) |
|||||
| DT 201 | 5/10 | 2 – 200 | 2-200mm with OD 45mm And more | +_ 0.1 mm upto 60 mm, +_ 0.5%
above 60mm |
0 to 70 Deg. C | General purpose For Flat surface and Bigger dia. |
| DT 212 | 10/5 | 1 – 25 | 2-25 mm with OD 25mm and more | +_ 0.1 mm | 0 to 70 Deg. C | For lower dia. Tubes and thin objects. |
| DT 203 | 2/20 | 5 – 300 | 5-300 with OD 100 mm and more | +_ 0.3 mm up to 50 mm, +_ 1%
above 50 mm |
0 to 70 Deg. C | For castings and Other coarse- grain material. |
| DT 201 (H) | 5/10 | 4 – 50 | 5-10 with OD 100 mm And more | +_ 0.1 mm | 0 to 150 Deg.C | For elevated surface temperature |
(Modifications rights reserved)
Download Product Datasheet
Reviews
There are no reviews yet.