• Fluke PVA-1500T2 Solmetric PV Analyzer I-V Curve Tracer Kit in Bangladesh

    Features

    • Built-in PV performance modeling and advanced wireless irradiance, temperature and tilt sensing
    • Unprecedented measurement throughput with sweep-to-sweep delays as low as nine seconds
    • Saves time through automated data analysis and reporting, streamlining the process of obtaining and interpreting measurement results
    • Uninterrupted measurements even in hot environments
    • Measures and displays I-V curves up to 1500 V and 10 A
    • Advanced built-in PV model provides immediate PV performance checking
    • Sweep-to-sweep delay of nine seconds to measure 3.5 MW in under an hour
    • Database of more than 70,000 modules with automatic updates
    • Wireless interfaces for faster setup, safer work environment, and freedom of movement during PV troubleshooting
    • In-the-field firmware update ready
    • PC connection during testing allows you to analyze and manage data in the field
    • Solmectric PV Analyzer Software and Data Analysis Tool (DAT) insights, visualizations, and customizable reports
  • Fluke 62 MAX Plus Infrared (IR) Thermometer in Bangladesh

    Features

    • Provides a 12:1 Distance to spot ratio
    • Offers single laser targeting for accurate and repeatable measurements
    • IP54 rating against dust and moisture
    • High and low alarms for rapid detection of temperatures outside the limits
    • Powered by a single, standard AA battery
    • Withstands a 9.8′ (3 m) drop
    • Small, lightweight form factor to clip comfortably to your tool belt or belt loop, or easily fit in your tool box
    • A large, backlit display to make data easier to read, even in dark areas
    • Displays Min/Max/Avg/Dif: the minimum, maximum or average temperature, or the difference between two measurements
  • Sew ST-2000 Hz Portable Frequency Meter

    FEATURES

    • Principle : Frequency sensing transducer
    • Meets
    • Accuracy :
      ±0.5% of full scale value on 45 to 65 Hz range
      ±0.5% of full scale value on 0 to 100Hz range
      ±0.5% of full scale value on 0 to 500Hz range
    • Scale Length : Approx. 135mm (5-3/8”)
    • Case Material : Bakelite with glass window
  • Sew ST-2000Cos Portable Power Factor Meter

    FEATURES
    Principle : Phase angle sensing transducer
    Meets
    Rated Accuracy : ±3% phase angle
    Scale :
    Power Factor:Lead 0 – 0.3 – 1.0 – 0.3 – 0 Lag
    Power Angle: Lead 90° – 0° – 90° Lag
    Effective Power Factor Measuring Range :
    Lead 0.5 – 1.0 – 0.5 Lag
    Scale Length : Approx. 135mm(5-3/8”)
    Frequency Influence : Within ±1.5° phase angle at 45 to 65Hz

  • Digital Handheld Solar Power Meter in BD

    Features
    Wide spectral range.
    Excellent long term stability.
    Cosine corrected.
    Automatic transmission measurements.
    Select either power or transmission.
    Solar energy power or transmission.
    Current time setting function.
    User calibration factor setting function.
    End-mount light sensor.
    Select either W/m2 or Btu / (ft2*h) units
    Data Hold / MAX / AVG modes.
    Data Memory and Read function. (99 sets)
    Auto Data memory (TES-1333)

  • Sndway SW-MT4 Laser Distance Meter in Bangladesh

    Features:

    1. Accuracy±(3mm+d ..in affordable price.
    2. Easy operation – Handy and compact, easy to handle and carry to everywhere; LCD with back light supports better visibility in low-light conditions. 3. Multi Function– Distance, area, volume; Addition and subtraction; Max&Min values measure 
    4. Ideal hand tool for home, construction and industries, 40m-100m, models for options Usages covering rooms, apartments, buildings, real estates, factories, warehouses, etc
  • FNIRSI 1014D Digital Dual Channel Oscilloscope 100MHz

    Features:

    • Built in DDS signal generator, support 12 kinds of function signal.
    • Capture output signal function, which can store up to 1000 capture signals.
    • Targeted high intelligent decoding algorithm, the encoderlifeis infinite, and intelligent anti-burn function, 1X Can withstand up to 400V withstand voltage.
    • With 100MHz * 2 ana-log bandwidth and @ 1GSa/s sampling rate(1X = 5MHz, 10X = 100MHz).
    • Fully fit 7 inch 800 * 480 resolution color TFT LCD display with bright colors and high contrast.
    • High measurement voltage range: 1X can measure 0~40 V, 10X can measure 0~400V.
    • Up to 12 parameters measurement:VPP,VP,Vmax,Vmin,Vavg,Vrms,Frequent,Duty+,Duty-,Time+,Time-,Period.
    • Cursor measurement function: it is convenient to manually measure the period and frequency and voltage.
    • Complete triggering function (single, normal, automatic), and at any time, the waveform display (pause function) is frozen.
    • Equipped with high efficiency One-button AUTO, and one-button waveform storage and screenshot function.
    • Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data.
    • Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc.
    • Equipped with a USB interface, which can be connected to a com-puter to share its screenshots with the com-puter, which is convenient for secondary analysis.
    • Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals.
    • FFT display function, can analyze the spectral characteristics of the signal, memory compression technology, waveform refresh screen does not flicker.
  • R&S Scope Rider RTH1002 Handheld Oscilloscope 60 MHz

    • 60 MHz bandwidth
    • 2 analog channels
    • sampling rate: 5 GSa/s
    • Memory: 500 kSa
    • CAT IV 600 V
    • digital multimeter
  • Tektronix THS3000 Handheld Oscilloscope

    Key performance specifications

    • 100 MHz or 200 MHz bandwidth models
    • Maximum sample rates up to 5 GS/s and 200 ps resolution 4 fully isolated and floating channels
    • 600 Vrms CAT III, 1000 Vrms CAT II rated inputs (BNC to earth ground)

    Key features

    • 21 automatic measurements
    • Waveform math and FFT spectral analysis
    • Volts, time, frequency, watts cursor measurements Measurement data logging with TrendPlot™
  • Peak ESR70 Atlas ESR Gold Equivalent Series Resistance Meter

    New Gold Features:
    Improved LCD with better backlight.
    10x faster capacitance measurement for large capacitors.
    Enhanced user options system.
    New triple-slope measurement system to vastly reduce the influence of parallel resistance and/or leakage current on capacitance measurements.
    Much wider capacitance measurement range now 0.3uF to 90,000uF (was 1uF to 22,000uF).

    Specification Summary:
    Uses a single AAA Alkaline cell (included).
    Alphanumeric LCD with backlight.
    Automatic analysis-start when you apply the probes.
    Automatic capacitor discharge using controlled discharge function.
    ESR (and low DC resistance) measurement (even in-circuit).
    Capacitance measurement (if testing out-of-circuit).
    Audible alerts for various ESR levels.
    Extended ESR measurement range up to 40 Ohms.
    Optional probe alternatives easily fitted.

  • Fluke 1773 Three-Phase Power Quality Analyzer in BD

    Fluke 1773 is make data capture as reliable and easy as possible with the power quality analyzer that features instrument powering from the measurement circuit, automatic connection check, and correction. The 1773 Power Quality Analyzer replaces the discontinued 434-II Three-Phase Analyzer

  • Fluke 1630-2FC Earth Ground Clamp Meter in BD

    Features

    • AC leakage current measurement – identify ac leakage currents without disconnecting the earth ground stake from the grounding system – ideal for system troubleshooting
    • Rugged – heavy-duty clamp jaw stays in alignment and in calibration even in every day, on the job industrial environments
    • Logging measurements – the earth ground clamp saves time by automatically recording data at pre-set intervals and saves up to 32,760 measurements in memory at the set logging interval
    • Alarm threshold – user-defined high/low alarm limits, for rapid measurement evaluation
    • Band-pass filter – selectable band-pass filter function removes unwanted noise from the ac leakage current measurement
    • Fluke Connect compatible

Main Menu